Reference illustration — produced to your drawing
Fastener Families
Anchors
Anchors are fasteners that transfer a load from an attached component into a base material such as concrete, masonry, or a hollow wall. They expand, wedge, or toggle behind the surface so a fixing can be made from one side only.
Used to secure handrails, brackets, machinery, racks, and structural supports to concrete and masonry in construction, maintenance, and general fabrication. Buyers are contractors, installation teams, and distributors stocking fastening lines.
Standard
To your drawing
Size range
Quoted per drawing
MOQ
From 50 pcs
Lead time
Samples 5–10 days
What we produce
- Wedge anchors for solid concrete and masonry
- Sleeve and drop-in anchors for flush concrete fixings
- Toggle and hollow wall anchors for cavity walls
- Concrete screws as a removable alternative
- Steel and stainless steel 304/316 bodies
- Zinc plating or hot-dip galvanizing available
Specification notes
- Anchor diameter and embedment depth sized to base material and load
- Crack-resistant and seismic variants quoted on request
- Supplied with matching nuts and washers where applicable
Specifications
Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.
| Size range | Quoted per drawing |
|---|---|
| Threads | Metric coarse · UNC |
| Head / geometry | Hex nut, hex washer head, or flat head depending on anchor type |
| Materials | Stainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium |
| Finishes | As machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network) |
| Precision | ±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions |
| Marking | Head marking, grade marking or your own identification mark per drawing |
| Documents | Material certificate (MTR) with every batch, plus pre-shipment photos before dispatch |
| MOQ | From 50 pieces per type and material · samples from 1 piece |
| Sample lead time | 5–10 days |
| Production lead time | 25–35 days after sample approval |
| Quote | Within 24 hours, with DFM feedback |
Other fastener families we manufacture
See all 179 part types →
Send us the drawing
We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.
Request a quote