Request a Quote

Tell us the part, the quantity and the material. Attach a drawing if you have one — we read it and come back with DFM feedback and a price within 24 hours.

Quote in 24 hours
With DFM feedback, not just a number.
MOQ from 50 pieces
Samples from 1 piece, so a first run does not mean a container.
±0.01 mm on precision features
ISO 2768-m general tolerance elsewhere.
MTR + pre-shipment photos
Material certificate and photos of your actual parts before dispatch.

Prefer to talk first? Use the chat button in the corner, or seecontact details.

★ = recommended for cost saving and speed. Naming the exact grade saves a round of questions — if your drawing calls for something not listed, chooseSpecial Order or say so in the notes.

You may select multiple finishes — list the rest in the notes and specify the required parameters after selection.

Colour and parameter options
  • · Alodine — clear, yellow
  • · Anodize Standard — black, blue, brown, clear, gold, gray, green, orange, purple, red, yellow
  • · Anodize Hardcoat — black (satin .002 in.), non-dyed (satin .002 in.)
  • · Powder Coat (gloss / matte / metallic / textured) — white, black, red, yellow, green, blue, orange, purple, pink, brown, tan, gray, custom colour
  • · Hardening — give the hardness range on the drawing (e.g. HRC 30–35)
  • · Copper plating — minimum deposit .0001 in. or .0005 in.

Only if the drawing specifies one.

STEP, IGES, DWG, DXF, PDF, STL, ZIP — up to 20 MB. Your files stay confidential; NDA on request.

For a more accurate quote

  • ● A drawing or CAD file — DXF, IGES, STEP, STL, SLDPRT and more. It does not have to be a finished drawing.
  • ● Threading and tolerances are best called out on the drawing. If they are not, write them in the notes below — a PDF, PNG or JPG of the marked-up view works too.
  • ● A photograph of an existing part is often enough for us to quote a replacement.

We reply with DFM feedback and a price at your quantity. A material certificate (MTR)and pre-shipment photos come with every order.

What happens after you send the form

  1. Step 1

    You send the drawing

    STEP, IGES, DWG, DXF, PDF or even a sketch with dimensions — whatever you have.

  2. Step 2

    We review manufacturability

    Tolerances, geometry, material and finish are checked, and we flag anything that adds cost.

  3. Step 3

    You get a quote in 24 hours

    Unit price at your quantity, lead time, and any tooling or setup notes.

  4. Step 4

    Sample, then production

    Sample in 5–10 days, production in 25–35 days, with material certificate and pre-shipment photos.

Drawing & file requirementsDFM guideTolerances we holdWhat ships with your order

Not sure what to send?

Send whatever you have — a photo of an existing part, a sketch, or just a description with key dimensions. We will tell you what else is needed.

Go to the formBack to top